Z25 PARTS LIST FOR HI REV

HARDWARE

4........10-24 X 1/2...............................Front motor mount
3........5/16 X .058 wall X 1.100............Pull starter standoffs
3........10-24 X 1 1/2 Flat head..............Pull starter standoff screws
2........8-32 X 7/8.................................Source coil bolts
2........5/16 X .275 Stainless steel..........Source coil standoffs
2........5/16 X .050 Stainless steel..........Source coil mounting washers and base bolts
4........10-32 X 3/4...............................Intake manifold bolts (2) and (2) tuned pipe flange
4........10-24 X 1 3/ 4 Flat head..............Case screws
10......5-40 X 5/8.................................Cylinder head bolts
4........6-32 X 3/4.................................Water cover bolts
2........10-32 X 3/16 Set screw..............Pulse port block off screws
3........10-32 Thread.............................Hose barbs
2........1/8 X 3/8 Dowel pins Cylinder base
2........Wrist pin circlips.......................RedMax part# 1260-41320
1........Silicone o-ring...........................Water cover
2........#8 Washer................................Ignition coil mt.
2........8-32 X 3/8 Bolts........................Ignition coil mt.
2........#10 Washer...............................Goes under head of intake manifold bolts
1........Silicone o-ring...........................Head button

BASE BOLT KIT

4........8-32x5/8 Bolts...........................For cylinder base
4........5/16 x. 050 Stainless steel..........Cylinder base washers
4........#8 Belleville Washers.................Cylinder base lock washers
1........Base Gasket...............................For cylinder base
1........Intake Gasket.............................Used in between intake manifold & cylinder

HARD PARTS

1........Watercover
1........Head button
1........Cylinder sleeve
1........Cylinder casting
1........Set of cases
1........Ignition plate
1........Piston
1........Piston Ring.................................RedMax part# 5910-41210